TM 9-1240-271-34&P
4-19.
PLATE ASSEMBLY DISASSEMBLY (CONT)
Procedure
Step
--
1.
Using 1/4" flat tip screwdriver, remove two screws (1) and two washers (2).
Pull apart evenly stop (3) and latch (4) and slide off dowel pins (5).
2.
NOTE
Do not remove dowel pins (5) except to replace if
damaged.
Using parallel action jaw pliers, remove two dowel pins (5).
3.
GO TO FRAME 7
Para 4-19 Cont
4-30
Vol II
