TM 9-1240-271-34&P
4-20.
PLATE ASSEMBLY ASSEMBLY (CONT)
Step
Procedure
NOTE
If dowel pins (1) were not removed, go to step 2
1.
Using soft face hammer, install two pins (1) to latch (2).
Place stop (3) on top of latch (2) so that mounting holes are in line with pins (1).
2.
Using hand, press stop (3) in place.
3.
Using 1 /4" flat tip screwdriver, install two screws (4) and two washers (5).
GO TO FRAME 3
--
Para 4-20 Cont
4-33
Vol II
