TM 9-1240-271-34&P
4-19.
PLATE ASSEMBLY DISASSEMBLY (CONT)
FRAME 5
Step
Procedure
Using retaining ring pliers, remove two rings (1) and two washers (2). Remove two
1.
supports (3) from two arms (4).
Using hammer and 1 /8" punch, remove two pins ( 5 ) and leave punch in pin hole. Hold
2.
arm (4) under slight pressure and remove punch. Remove two arms (4), two plungers
(6), and two springs (7) from bracket (8).
GO TO FRAME 6
I
Para 4-19 Cont
Vol II
4-29
