TM 9-1240-271-34&P
PLATE ASSEMBLY DISASSEMBLY
TOOLS: 1/4", 3/8" flat tip screwdriver
3/32", 1/8" drive pin punch
4 oz. ball peen hammer
5/32" socket head screw key (Allen wrench or equivalent)
1/4" open end wrench
Retaining ring pliers, external 0.023 tip
Retaining ring pliers, external bent tip 002.2
Brass drift pin
Scriber, machinists
Parallel action jaw pliers
PERSONNEL: One
EQUIPMENT CONDITION: Plate assembly on work bench
FRAME
1I
--
Step
Procedure
--
1.
Using 1/4" flat tip screwdriver, remove four screws (1) and four washers (2).
2.
Using fingers, slide bracket assembly (3) from pins (4) mounted in plate (5), then
remove bracket assembly (3).
3.
Using hammer and 3/32" punch, remove pin (6), but allow 3/32"' punch to stay in pin
(6) hole holding parts in place.
4.
Using one hand, put a little pressure on latch assembly (7) to compress springs (8). With
other hand, remove 3/32" punch.
Release pressure slowly and remove latch assembly (7) and two springs (8).
5.
GO TO FRAME 2
Vol II
