TM 9-1240-271-34&P
PLATE ASSEMBLY DISASSEMBLY (CONT)
4-19.
FRAME
2I
--
Procedure
Step
NOTE
Two 10-32 x 5/8 screws from shield operating handle
may be used (para 4-25, Frame 2, item 1).
Using Allen wrench, tighten two 10-32 x 5/8 screws (1) into plungers (2).
1.
Move lever (3) up and down and tighten both screws (1) unti1 lever (3) and shaft move
2.
easily.
3.
Using open end wrench, remove two self-locking screws (4).
GO TO FRAME 3
Para 4-19 Cont
Vol II
4-25
