TM 9-1240-271-34&P
4-19.
PLATE ASSEMBLY DISASSEMBLY (CONT)
Step
Procedure
NOTE
Pin ( 1 ) is tapered and can be removed. only one way.
1.
Using hammer and 3/32" punch, remove pin (1) from grip (2) and remove grip (2)
from shaft (3). No more disassembly is required as items are replaced as a unit.
2.
Using hammer and 3/32" punch, drive pin (4) as far out as the punch will let it go.
3.
Using parallel action jaw pliers, remove pin (4) and push out spring (5) and plunger
(6).
GO TO FRAME 5
Vol II
4-28