Section V. Direct Support Final Inspection Procedures
2-14. GENERAL
a.
This section describes and illustrates the final inspection of the M146 telescope mount. A final inspection will be
performed prior to returning the M146 telescope mount to the using unit or to the supply system.
b. If the Ml 46 telescope mount being inspected fails to meet the required standards, ensure all maintenance
authorized at the applicable level has been performed correctly.
2-15. M146 TELESCOPE MOUNT FINAL INSPECTION AND ADJUSTMENT
This task covers:
d. Checking deflection knob travel
a. Checking elevation slide/elevation bracket end
play
b. Checking elevation knob travel
Checking deflection knob mechanism running
e.
torque
c.
Checking elevation knob mechanism running
torque
INITIAL SET-UP
.
Tools and Special Tools
Torque wrench (in-oz) (Item 35, appx F)
Spanner wrench, fabricated (fig. C_5 appx C)
Tool Kit, Electronic System, Repair, Field Main-
tenance (SC51 80-95-CL-B29)
Matenials/Parts
LockWashers (2) (Item 70, appx E)
Sealing compound (Item 13, appx B)
Torque adapter (Item 8, appx F)
2-21
