TM 9-1240-401-34&P
I
c. CHECKING ELEVATION KNOB MECHANISM RUNNING TORQUE
1 With torque wrench and adapter (8599922), rotate
elevation knob (1) clockwise and counterclockwise.
NOTE
Torque wrench should indicate running torque
of 56 to 72 ounce-inches (0.395 to 0.508
N-m). If running torque is not within specified
limits, adjust as directed in steps 2 thru 4.
2 Loosen setscrew (2).
3 Using fabricated spanner wrench, adjust threaded
ring (3) until required running torque is obtained.
4 Tighten setscrew (2).
I
d. CHECKING DEFLECTION KNOB TRAVEL
1
Rotate deflection knob (1) from stop to stop and
check amount of travel.
NOTE
Deflection knob must rotate 2-1/2 complete
revolutions. If the 2-1/2 revolutions cannot be
met, adjust mechanism as directed in steps 2
thru 6.
2
Loosen setscrew (2).
3
Loosen self-locking nut (3) on deflection shoulder
screw (4).
4
Adjust deflection shoulder screw (4) in or out to
obtain minimum travel requirements.
5
Tighten setscrew (2).
6
Tighten self-locking nut (3).
2-23