2-13. CABLE ASSEMBLY MAINTENANCE INSTRUCTIONS - continued
a.
Disassembly - continued
8
Unscrew and remove bushing (17), flat washer
(18), and preformed packing (19) from electrical
shell connector (8).
9
Remove electrical shell connector (8), preformed
packing (19), flat washer (18), and bushing (17)
from cable (9).
10
Remove gasket (20) from electrical plug connector
(21). Discard gasket.
11
Unscrew and remove bushing (22) from connector
shell (23).
12
Remove flat washer (24) and preformed packing
(25) from connector shell (23).
13
Unscrew connector shell (23) from electrical plug
connector (21 ) and slide connector shell (23) along
cable (9) away from electrical plug connector (21 ).
14
Remove electrical plug connector (21) from cable
(9) by unsoldering leads of cable.
15
Remove and discard gasket (26).
16
Remove two insulation sleevings (27) from cable
(9) leads.
17
Remove connector shell (23), preformed packing
(25), flat washer (24), and bushing (22) from cable
(9).
18
Remove lug terminal (28) from wire (29).
19
Remove wire (29) from connector shell (23).
20
Remove three clamps (30) from cable (9).
2-18
