TM 9-1240-400-34&P
6
Apply sealing compound (item 10, appx C) to
threads of four screws (9).
7
Install two new felts (10), two plates (11), and four
screws (9) to support housing (12).
8
If removed, drill and ream gear (13) and drive in two
pins (14). Refer to TM 9-254.
9
Install key (15). Hold support housing (12) against
gear (6) and install gear (13) over gear and support
housing with attached bracket (1).
10 Secure support housing (12), to gear (13) using four
new lock-washers (16) and four capscrews (17).
11 Apply sealing compound (item 10, appx C) to heads
of four screws (9) and four capscrews (17) after
tightening.
5-43
