TM 9-1240-400-34&P
5-16.
MAINTENANCE OF TELESCOPE MOUNT SUBASSEMBLY LOWER ASSEMBLY (CONT).
CLEANING
Clean all parts per TM 9-254.
REPAIR
1
If housing is broken, damaged, or missing, repair is by replacement of next higher assembly.
2
Repair is by replacement of authorized parts as required. Refer to appendix B.
REASSEMBLY
NOTE
Apply a light coat of aircraft grease (item
8, appx C) to all moving parts.
1
If removed, drill and ream bracket (1) and drive in
two pins (2). Refer to TM 9-254.
2
Apply sealing compound (item 10, appx C) to
threads of two screws (3) and two screws (4).
3
Install two stops (5), two screws (3), and two screws
(4) to gear (6).
4
Install gear (6), four new lockwashers (7), and four
capscrews (8) on bracket (1).
5
Apply sealing compound (item 10, appx C) to heads
of screws (3 and 4) and capscrews (8) after
tightening.
5-42
