TM 9-1240-400-34&P
3
If necessary, scribe a line on bevel gear (5) and
worm shaft (6) to aid reassembly. Remove setscrew
(7), tapered pin (8), and bevel gear (5) from worm
shaft (6).
4
Using adjustable spanner wrench, remove retainer
(9), nonmetallic washer (10), spring (11), and
nonmetallic washer (12).
5
Remove plug (13) and detent plunger (14).
6
Remove worm shaft (6), detent plunger (15), and
spring (16).
7
Remove pin (17), retainer (18), preformed packing
(19), and bearing (20) from worm shaft (6). Discard
preformed packing.
8
Remove six screws (21) and ring spacer (22).
9
Separate housing (23) and ring assembly (24).
5-39
