TM 9-1240-400-34&P
REASSEMBLY
NOTE
If disassembled, adjust level bar. Refer to page 5-56.
1
Install spring (1), capscrew (2), and convex washer (3) to mount telescope bar (4).
2
If removed, install headed straight pin (5) in mount telescope bar (4) and flush peen bottom.
3
If removed, drill and ream bracket (6) and drive in pin (7). Refer to TM 9-254.
4
Install mount telescope bar (4) and drill and ream holes for pin (8) and pin (9).
5
Drive in two pins (8 and 9).
6
Install identification plate (10) and two screws (11) to mount subassembly (12).
7
Install bracket assembly (13) to housing with three capscrews (14) and three lockwashers (15).
5-35
