TM 9-1240-271-34&P
4-20.
PLATE ASSEMBLY ASSEMBLY (CONT)
FRAME 8
--
Procedure
Step
Put two springs ( 1 ) in latch assembly (2). Put latch assembly (2) in plate (3). Line up
1.
holes and hold in place.
Using finger, put pin (4) in hole. Using ball peen hammer and punch, install pin (4) to
2.
hold latch assembly (2) to latch grip (5).
Place bracket assembly (6) in line with two locating pins (7) and push bracket assembly
3.
(6) gently onto plate (3).
4.
Using 1 /4" flat tip screwdriver, install four washers (8) and our screws (9).
END OF TASK
Para 4-20 Cont
Vol II
4-40
