TM 9-1240-271-34&P
SHIELD OPERATING HANDLE ASSEMBLY A N D INSTALLATION (CONT)
Step
Procedure
1.
Place bracket (1) on support (2) and line up holes, key, and key way. Push, or using soft
face hammer, gently tap in place.
2.
Using 7/32" or 1 /4" Allen wrench, install two washers (3) and two screws (4) to hold
bracket (1) to support (2).
3.
put a small amount of aircraft and instrument grease on bar (5) (JPG).
4.
Using 7/32" or 1 /4" Allen wrench, install two washers (6) and two screws (7) through
bars (5) to hold handle (8) to bracket (1).
NOTE
FOLLOW-ON MAINTENANCE
Do performance test (Vol I, para 2-2).
END OF TASK
Para 4-24 Cont
Vol II
4-48
