TM 9-1240-271-34&P
SHIELD OPERATING HANDLE REMOVAL AND DISASSEMBLY
TOOLS: 1/4", 7/32", 5/32" socket head screw key
(Allen wrench or equivalent)
1/2" open end wrench
Soft face hammer
PERSONNEL: One
EQUIPMENT CONDITION: Support on work bench or in tank
I
--
Step
Procedure
1.
Using 7/32" or 1/4" Allen wrench, remove two screws (1) and two washers (2). Lift off
handle (3) and attached parts from bracket (4).
NOTE
Bracket may need a slight tap with soft face hammer to
separate it from support.
[
2.
Using 7/32" wrench, remove two screws (5), two washers (6), and bracket (4) from
support (7).
GO TO FRAME 2
Vol II
4-43/(4-44 blank)
