TM 9-1240-380-34
3-6.
ELBOW ASSEMBLY INSPECTION UPON RECEIPT (CONT)
FRAME 3
Step
Maintenance Action
Reference
Procedure
If it cannot be read, tell your
1.
Check that switch assembly
...
supervisor.
plate (1) can be read.
Tighten. Replace if missing.
2.
Using 3/ 8" open end wrench,
check that valve cap (2) is
tight.
Tighten. Replace if missing.
3.
Using 1/16" pin open face
spanner wrench, check that
two screws (3) are tight.
...
4.
Tighten. Replace if missing.
Using #1 Phillips screwdriver,
check that eight screws (4)
are tight.
...
Tighten. Replace if missing.
5.
Using #1 Phillips screwdriver,
check that four screws (5) are
tight.
6.
Tighten. Replace if missing.
Using .050" Allen wrench,
check that four setscrews (6)
in knob (7) are tight.
Put RTV sealant in holes (8).
JPG 41C
7.
Check that RTV sealant is in
holes (8),
...
Tighten. Replace if missing.
8.
Using #0 Phillips screwdriver,
check that two screws (9) are
tight.
...
Tighten. Replace if missing.
9.
Using 1/8" Allen wrench,
check that setscrew (10) is
tight.
GO TO FRAME 4
Vol II
3-36