TM 9-1240-380-34
Section 9. BORESIGHT KNOBS ASSEMBLY
BORESIGHT KNOBS ASSEMBLY MAINTENANCE PROCEDURES INDEX
Task
Reference (para)
Removal
Installation
BORESIGHT KNOBS ASSEMBLY REMOVAL
APPLICABLE CONFIGURATIONS: M36E1
TOOLS: #1 cross tip screwdriver ( Phillips type)
Jewelers screwdriver
PERSONNEL: One
EQUIPMENT CONDITION: Elbow assembly on work bench, power off
FRAME 1
Step
Procedure
NOTE
Maintenance procedures for both boresight knob
assemblies are the same.
1.
Using Phillips screwdriver, remove four screws (1), four washers (2), and boresight knob
assembly (3) from elbow assembly (4).
2.
Using jewelers screwdriver, remove packing (5) from boresight knob assembly (3).
END OF TASK
Vol II