TM 9-1240-380-34
3-6.
E L B O W ASSEMBLY INSPECTION UPON RECEIPT (CONT)
FRAME 4
Step
Procedure
Maintenance Action
Reference
Using #l Phillips screwdriver,
1.
Tighten. Replace if missing.
...
check that six screws (1) are
tight.
Using #2 Phillips offset
2.
Tighten. Replace if missing.
...
screwdriver, check that four
screws (2) are tight.
Check latch (3) for damage.
3.
a.
Replace latch if damaged.
Using #1 Phillips screwdriver,
b.
...
Tighten. Replace if
check that two screws (4)
missing.
(under latch) are tight.
4.
Check that lampholder (5) is
Tighten. Replace missing
tight. Check that cord (6) and
part(s).
packing (7) are installed.
5.
Check contact (8) for damage.
If damaged, tell your
...
supervisor.
6.
Using #0 Phillips screwdriver,
Tighten. Replace if missing.
...
check that four screws (9) are
tight.
7.
Using #2 Phillips screwdriver,
Tighten. Replace if missing.
...
check that screw (10) is tight.
8.
Using 5/64" Allen wrench,
Tighten. Replace if missing.
...
check that setscrew (11) is
tight.
GO TO FRAME 5
Para 3-6 Cont
3-38
Vol II
