TM 9-1240-380-34
3-6.
ELBOW ASSEMBLY INSPECTION UPON RECEIPT (CONT)
Procedure
Maintenance Action
Reference
Check that switch (1) moves
If binding, tell your supervisor.
...
to ON and OFF positions
without binding,
Check that plug (2) is present.
If missing, tell your supervisor.
...
Look into hole (3) and check
If missing, tell your supervisor.
...
that plunger (4) is present.
Using #1 Phillips screwdriver,
Tighten. Replace if missing.
...
check that four screws (5) are
tight.
Using #2 Phillips screwdriver,
Tighten. Replace if missing.
...
check that four screws (6) are
tight.
Using .050" Allen wrench,
Tighten. Replace if missing.
...
check that two setscrews (7)
are tight.
NOTE
FOLLOW-ON MAINTENANCE:
Correct faults listed on DA
Form 2404 that may affect
the checkout procedure.
Do checkout procedure
END OF TASK
3-42
Vol II