TM 9-1240-380-34
ELBOW ASSEMBLY INSPECTION UPON RECEIPT
APPLICABLE CONFIGURATIONS: M36E1
TOOLS: #0, #1, and #2 cross tip screwdriver (Phillips type)
#2 cross tip offset screwdriver (Phillips type)
3/8" open end wrench
3/32" and 1/16" pin open face spanner wrench
.050", 1/16", 1/8", 3/16", and 5/64" socket head screw key
(Allen wrench or equivalent)
Paint (item 5, App. A)
SUPPLIES:
Primer (item 6, App. A)
PERSONNEL: One
REFERENCES: TM 43-0139 for painting
TM 9-254 for general maintenance
EQUIPMENT CONDITION: Elbow assembly on work bench
FRAME 1
Reference
Maintenance Action
Procedure
Step
If cracks are found, perform
Check elbow assembly (1) for
1.
purging and charging
crack or dents.
procedure.
If leaks are found, fault
isolate for leaks.
TM 9-254
a.
Check lens (2) and (3) for
2.
Clean, if dirty.
...
b.
If cracked or
cracks, scratches, and dirt.
scratched, tell your
supervisor.
...
If cracks or scratches are
Looking through lens (3),
3.
found. tell your supervisor.
check prism (4) for cracks
and scratches.
If condensation is seen, purge
Look through lens (3), check
4.
and charge.
for condensation.
TM 9-254
Clean. Paint chipped or
Check elbow assembly (1) for
5.
TM 43-0139
scratched area.
dirt, chipped or scratched
paint and corrosion.
GO TO FRAME 2
Vol II
