TM 9-1240-216-34
BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY REMOVAL (CONT)
4-17.
NOTE
Do frame 3 for M19 and M24 new configurations only.
NOTE
This procedure is for either the left-hand or right-hand
board assembly, but only the right-hand side has ground
wire.
FRAME 3
Procedure
Step
1.
Using screwdriver, remove screw (1) and lockwasher (2).
2.
Using screwdriver, remove screw (3), lockwasher (4), ground wire (5), and spacer.
3.
Lift terminal board housing (7) and slide off from terminal board (8).
4.
Tag each wire attached to terminal board (8) (JPG).
5.
Using screwdriver, remove screw (9), washer (10 ), and ground wire (5).
6.
Using screwdriver, remove screw (11), washer (12), and wires (13) and (14).
7.
Remove terminal board (8).
END OF TASK
Para 4-17 Cont
4-28
Vol II