Section 5. BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY

TM 9-1240-216-34

4-16.

BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY MAINTENANCE

PROCEDURES INDEX

Reference (para)

Task

Removal

Installation

BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY REMOVAL

4-17.

TOOLS: 3/ 16" flat tip screwdriver

PERSONNEL: One

REFERENCES: JPG 41C for tagging wires

EQUIPMENT CONDITION: Body assembly on work bench; power disconnected

PRELIMINARY PROCEDURES: Remove cover (para 4-14)

NOTE

Frames 1 and 2 are for M19 and M24 old configurations.

Frame 3 is for M19 and M24 new configurations.

NOTE

This procedure is for either board assembly.

FRAME 1

Step

Procedure

Using screwdriver, remove two screws (1) and two lockwashers (2) which hold terminal

housing (3) to body assembly (4).

Remove spacer (5).

Slide terminal housing (3) off of board assembly (6).

GO TO FRAME 2

Para 4-16

4-24

Vol II