BODY COVER INSTALLATION

TM 9-1240-216-34

4-15.

TOOLS: Hydraulic sealing gun

1/4" flat tip screwdriver

Pocket knife

Sealing compound (item 8, App A)

SUPPLIES:

Dry cleaning solvent (item 9, App A)

Cloth (item 1, App A)

PERSONNEL: One

REFERENCES: JPG 4lC for sealing procedures

EQUIPMENT CONDITION: Body assembly on work bench; power disconnected

FRAME 1

Procedure

Step

WARNING

Dry cleaning solvent can catch on fire. Keep it and all

material that can catch on fire away from flames. Use

only in room with a lot of fresh air.

Using pocket knife, scrape off old sealing compound. Using dry cleaning solvent on cloth,

clean off any remaining old sealing compound from cover (1) and body assembly (2).

Place cover (1) on body assembly (2).

Using screwdriver, put in and tighten 15 lockwashers (3) and 15 screws (4).

Using sealing gun, force sealing compound in 8 sealing holes (5) of cover (1) until

completely sealed (JPG).

NOTE

FOLLOW-ON MAINTENANCE

Do final inspection (para 5-1).

END OF TASK

Para 4-15

4-22

Vol II