TM 9-1240-415-13&P
0021 00
ASSEMBLY - Continued
2.
Apply sealing compound primer (item 6, WP 0036 00) to threads of new
socket head screw (3) and threaded end of shaft (1).
3.
Apply Locktite 680 (item 4, WP 0036 00) to the screw threads of socket
head screw (3).
4.
Install socket head screw (3) and tighten with a 5/64 in. key wrench
through the top of the mount (2) and into the shaft (1).
5.
Place the flat washer (4) into the recess of the torque nut (5) and place
them both into the slot of the locking bar (6). With the wide side of the
locking bar at the top, screw the torque nut finger tight.
6.
Fit the torque knob (7) onto the shaft (1) up to the torque nut (5) so that
they mesh together. Push the spring (8) onto the shaft.
0021 00-6
