TM 9-1240-415-13&P
0021 00
DISASSEMBLY
1.
Remove the dust protective plug (1) from the end of the nut (2). (This
may permanently damage the dust protective plug).
2.
Using 3/8 in. special ground socket (item 3, WP 0025 00), remove the
nut (2).
3.
Remove the spring (3) and torque knob (4). Unscrew torque nut (5).
Remove torque nut and flat washer (6) from locking bar (7).
4.
Remove the socket head screw (8) through the top of the mount (9)
using a 5/64 in. key wrench. Remove the shaft (10) from the other side
of the mount.
0021 00-2
