TM 9-1240-415-13&P
0021 00
ASSEMBLY - Continued
7.
Screw on new nut (9) so that the spring (8) locates over the protruding
side of the nut. Tighten the nut until the torque knob (7) cannot
ratchet. Place a drop of Locktite 680 (item 4, WP 0036 00) onto the
threads of shaft (1). Turn the nut back off, over the Locktite 680, until
8.
Push on the new dust protective plug (10).
NOTE
NOTE
Lay the mount on its side, with the shaft vertical. Sealing
compound takes 24 hours to cure.
0021 00-8
