TM 91240-400-34&P
5-8.
MAINTENANCE OF UPPER TELESCOPE MOUNT ASSEMBLY (CONT).
REASSEMBLY (CONT)
12
Using solder (item 12, appx C), and soldering
to center and right terminals, and electrical wire
(23) to center terminal and right lug of variable
resistor (24).
13
Install variable resistor (24), washer (25), and
nut (26) to access cover (27).
14
Install knob (28) and setscrew (29) to shaft of
variable resistor (24).
15
Install gasket (30), access cover (27), six new
lockwashers (31), and six capscrews (32) to
housing (2).
16
Using solder (item 12, appx C), and soldering
flux (item 6, appx C), solder wire (9) to left lug of
variable resistor (24). Trim to fit.
17
Install extension light (33) in housing (2).
18
Using solder (item 12, appx C), and soldering
flux (item 6, appx C), solder extension light wire
to left terminal of variable resistor (24). Refer to
step 12.
5-16
