TM 9-1240-400-34&P
REASSEMBLY
1
Apply sealing compound (item 10, appx C) to
threads of bushing insulator (1).
2
Install bushing insulator (1) in housing (2) with
holes for two electrical contacts (3) on top and
bottom position.
3
Install two electrical contacts (3), two terminal
lugs (4), and two hexagon nuts (5) in bushing
insulator (1).
4
Using solder (item 12, appx C), and soldering
terminal lug (7) and lower electrical contact (3),
and electrical wire (8) to upper electrical contact
(3). Trim to fit.
5
Install terminal lug (7) and screw (9) in housing
(2).
6
Install electrical shell (10), elevating plate (11),
pin (12), and screw (13) in bushing insulator (1).
7
Apply sealing compound (item 10, appx C) to
threads of toggle switch (14).
8
Using solder (item 12, appx C), and soldering
(15) to one side of toggle switch (14), and two
electrical contacts (16) and contact assembly
plunger (17), and electrical wire (18) to other
side of toggle switch (14) and upper electrical
contact (3). Trim to fit.
9
Install toggle switch (14), hexagon nut (19), and
boot (20) to housing (2).
10
Apply adhesive (item 2, appx C) to nonmetallic
seal (21).
11
Install nonmetallic seal (21) and contact
assembly plunger (17).
5-15
