TM 9-1240-400-34&P
2
Remove three capscrews (5), three lockwashers
(6), and level assembly (7).
3
Remove two pins (8) only if damaged.
CLEANING
Clean all parts per TM 9-254.
REPAIR
1
Cover assembly is a repairable assembly; refer to page 5-19.
2
Level assembly is a repairable assembly; refer to page 5-24.
3
Repair is by replacement of authorized parts as required. Refer to appendix B.
REASSEMBLY
1
If two pins (1) were removed, drill and ream for
pins 0.25 in. (6.35 mm) deep in mount
subassembly (2).
2
Drive in two pins (1).
3
Install level assembly (3) on two pins (1) with
three new lockwashers (4) and three capscrews
(5).
5-11
