TM 91240-400-34&P
DISASSEMBLY
1
Disconnect extension light (1) from spring
tension clip (2).
2
Remove two screws (3), two lockwashers (4),
and spring tension clip (2).
3
Remove four capscrews (5), four lockwashers
(6), access cover (7), and gasket (8) from
housing (9).
4
Unsolder extension light (1) from variable
resistor (10) and remove from housing (9).
5
Unsolder electrical wire (11) from variable
resistor (10).
6
Remove six capscrews (12), six lockwashers
(13), access cover (14), and gasket (15) with
variable resistor (10) attached.
7
Remove setscrew (16) and knob (17) from
variable resistor (10).
8
Remove nut (18), washer (19), and variable
resistor (10) from access cover (14).
5-13
