TM 9-1240-400-34&P
REMOVAL/DISASSEMBLY
1
Remove screw (1), two screws (2), and three
lockwashers (3) from adapter.
2
Remove pin (5) and careful slide gear assembly (6)
from straight shaft (7).
3
Remove retaining ring (8), gear cluster (9), retaining
ring (10), and spur gear (11) from plate (12).
NOTE
Remove pins (13) only if damaged.
4. Remove plate (14) and two pins (13).
5
Remove screw (15), screw (i6), and two lockwashers
(17).
6
Carefully remove plate (18) to avoid damage to
gearshaft (19).
2-43
