TM 9-1240-400-34&P
2-12.
MAINTENANCE OF BODY ASSEMBLY, COVER ASSEMBLY, AND TELESCOPE SUBASSEMBLY (CONT).
REASSEMBL Y (CONT)
47 Apply adhesive (item 4, appx C) to mating surface of
telescope subassembly (55), and heads of two
screws (56), screw (57), and four screws (58).
48 Apply adhesive (item 4, appx C) to seven spacers
(59).
49 Install seven spacers (59) on telescope subassembly
(55).
50 Apply bead of adhesive (item 4, appx C) to mating
surface of telescope subassembly (55).
51 Install telescope subassembly (55), two new
lockwashers (60), two screws (56), four new
lockwashers (61), four screws (58), new lockwasher
(62), assembly cap (63), and new screw (57).
52 Apply a coat of silicone compound (item 11, appx C)
to seal (64).
53 Install seal (64) and necessary number of shims (65)
to remove slack on knob (66).
54 Install knob (66) and pin (67).
55 Apply a coat of silicone compound (item 11, appx C)
to new preformed packing (68).
56 Apply sealing compound (item 10, appx C) to heads
of three screws (69).
57 Install gasket (70), sleeve bearing (71), new
preformed packing (68), and three screws (69).
58 Install metal plate (72), new lockwasher (73), and
socket capscrew (74) on telescope subassembly
(55).
59 Install knob assembly (75) and pin (76).
2-38
