TM 9-1240-400-34&P
39 Remove wire (52), contact (73), and insulator (74).
40 Remove four screws (75) and guide (76) from body
(61).
41 Remove two setscrews (77).
CLEANING
Clean all parts per TM 9-254.
REPAIR
1
Adapter assembly is a repairable assembly; refer to page 2-42.
2
Worm assembly is a repairable assembly; refer to page 2-39.
3
Repair is by replacement of authorized parts as required. Refer to appendix B.
REASSEMBLY
NOTE
Apply a light film of aircraft grease (item
7, appx C) to contacting surfaces of all
moving or operable mechanical parts.
1
Apply sealing compound (item 10, appx C) to
setscrews (1) and to threads of four screws (2).
2
Install guide (3) and four screws (3) to body (4).
3
If removed, apply sealing compound (item 10, appx
C) to threads of contact (5) and insulator (6) and
install.
4
(item 6, appx C), solder wire (7) to contact (5).
2-33
