TM 9-1240-380-34
Section 3. LATCH
LATCH MAINTENANCE PROCEDURES INDEX
Reference (para)
Task
Removal
Installation
LATCH REMOVAL
TOOLS: Long nose pliers
# 1 cross tip screwdriver ( Phillips type)
PERSONNEL: One
EQUIPMENT CONDITION: Body assembly on work bench
FRAME 1
Step
Procedure
NOTE
Cotter pin (1) is not used with latch (2). Begin at step 2
when replacing latch (2).
1.
Using pliers, straighten ends of cotter pin (1) and remove from latch (3).
2.
Using screwdriver, remove two screws (4), two washers (5), and latch (2) or (3) from
body assembly (6).
END OF TASK
Vol II