TM 9-1240-380-34
Section 2. HOUSING PACKING
HOUSING PACKING MAINTENANCE PROCEDURES INDEX
Reference (para)
Task
Removal
installation
HOUSING PACKING REMOVAL
T O O L S : 9/64'" socket head screw key (Allen wrench or equivalent)
1/8" punch
4 oz ball peen hammer
EQUIPMENT CONDITION: Body assembly on work bench
FRAME 1
Step
Procedure
Using hammer and punch, remove pin (1) in direction shown by arrow.
1.
Using punch and hammer, drive pin (2) in direction of arrow for about 1/4" only.
2"
3.
Using Allen wrench, remove two screws (3).
4.
Remove lower housing (4) from upper housing (5).
Remove packing (6) from lower housing (4).
5.
END OF TASK
Vol II
