ARMY TM 9-1240-379-34
MARINE CORPS TM 04332A-34
7
Install spring pin (9), if removed.
Install new gasket (10).
8
Connect electrical connector (11) to
9
regulator assembly (12).
CAUTION
Make sure that four machine
screws (13) are the proper
length so that the regulator
assembly circuit card is not
shorted out.
NOTE
If the regulator assembly (12)
is replaced, remove two
machine screws (14) and
transfer the data plate (15) to
the new regulator assembly.
10
Install regulator assembly (12) and four
machine screws (13) in elbow assembly
(2).
11
After maintenance has been completed,
purge and charge in accordance with
T M 750-116.
3-7. SWITCH ASSEMBLYMAINTENANCE INSTRUCTIONS.
THIS TASK COVERS:
c . Reassembly
a. Disassembly
b.
Inspection/repair
INITIAL SETUP
Applicable Configurations
References
M32E1 and M32CE1 tank periscope
TM 9-1240-379-34P
T M 750-116
Tools and Special Tools
Instrument and fire control shop equip-
Equipment Conditions
ment (SC 4931-95-CL-A07)
Instrument and fire control system repair
from elbow assembly
shop equipment (SC 4931-95-CL-A09)
Materials/Parts
Solder (item 18, app B)
