TM 9-1240-285-34&P
SLIDE ASSEMBLY AND BOOTS INSTALLATION
TOOLS: 5/64" socket head screw kev (Allen wrench or equivalent)
3/16" flat tip screwdriver
9/16" box wrench
Soft face hammer
Long nose pliers
PERSONNEL: One
EQUIPMENT CONDITION: Telescope mount on work bench
FRAME 1
Procedure
Step
1.
Place key (1) in keyway (2) of telescope mount housing (3).
2.
Using Allen wrench, install screw (4) to hold key (1) in place.
3.
Place key (5) in keyway (6) of telescope mount housing (3).
4.
Using screwdriver, install screw (7) and lockwasher (8) to hold key (5) in keyway (6).
5.
Place ring (9) against housing (10).
6.
Using screwdriver, install six screws (11) in ring (9).
GO TO FRAME 2
Vol II