TM 9-1240-216-34
4-10. ELEVATION LOCK ASSEMBLY DISASSEMBLY
TOOLS: 7/16" open end wrench
3/8" drive pin punch
4 oz. ball peen hammer
Hand thread chaser -18 exterior
PERSONNEL: One
REFERENCES: JPG 41C for using thread chaser
EQUIPMENT CONDITION: Lock assembly on work bench
FRAME 1
Procedure
Step
1.
Using open end wrench, remove nut (1) and special washer (2) from stud (3) of plate
assembly (4).
Using open end wrench, remove nut (5), washer (6) and key washer (7) from stud (8)
2.
of plate assembly (4).
3.
Turn lever (9) counterclockwise to unscrew round nut (10).
4.
Using hammer and drive pin punch, drive round nut (10) out of lever (9).
5.
Remove key washer (11) from stud (8) of plate assembly (4).
6.
Lift segment (12) off plate assembly (4).
NOTE
Do Step 7 for M24 configurations only.
7.
Remove screw (13) from plate assembly (4).
GO TO FRAME 2
Para 4-10
4-10
Vol II