TM 9-1240-216-34
4-6.
HEADREST ASSEMBLY ASSEMBLY
TOOLS: 3/8" flat tip screwdriver
#2 cross tip screwdriver (Phillips type)
4 oz. ball peen hammer
PERSONNEL: One
EQUIPMENT CONDITION: Headrest assembly on work bench
FRAME 1
Procedure
Step
Place two bracket assemblies (1) in position on headrest frame (2).
1.
2.
Using flat tip screwdriver, put two special screws (3) onto headrest frame (2).
Put two wing knobs (4) on special screw (3). Line up in holes.
3.
Using hammer, drive spring pins (5) into hole of wing knobs (4).
4.
Hold headrest (6) in position on headrest frame (2).
5.
Using Phillips screwdriver, install headrest (6) on headrest frame (2) with two
6.
END OF TASK
Para 4-6
4-5
Vol II