TM 9-1240-216-34
ELEVATION LOCK ASSEMBLY REMOVAL
4-9.
TOOLS: 1/4" flat tip screwdriver
#2 Phillips
PERSONNEL: One
EQUIPMENT CONDITION: Body assembly on work bench; power disconnected
FRAME 1
Procedure
Step
Using screwdriver, remove three screws (1) and three washers (2) from body assembly
1.
(3).
Turn lever (4) counterclockwise to loosen segment (5).
2.
NOTE
Do steps 3 and 4 for M24 configurations only.
Move segment (5) to line up notch on segment (5) with screw (6).
3.
Using screwdriver, remove screw (6) from body assembly (3) while lifting on lock
4.
assembly (7). Screw (6) will remain in lock assembly (7).
Remove lock assembly (7) from body assembly (3).
5.
END OF TASK
Para 4-9
4-9
Vol II