TM 9-1240-216-34
4-5.
HEADREST ASSEMBLY DISASSEMBLY
TOOLS: 3/8" flat tip screwdriver
#2 cross tip screwdriver (Phillips type)
4 oz. ball peen hammer
1/16" drive pin punch
PERSONNEL: One
EQUIPMENT CONDITION: Headrest assembly on work bench
FRAME 1
Procedure
Step
Using hammer and drive pin punch, drive out two spring pins (1) which lock wing
1.
knobs (2) to two special screws (3).
Using flat tip screwdriver, remove two special screws (3) while holding wing knobs (2).
2.
Using hammer and drive pin punch, drive two special screws (3) from wing knobs (2).
3.
Remove bracket assemblies (4) from headrest frame (5).
4.
Using Phillips screwdriver, remove two screws (6) and two lockwashers (7) from headrest
5.
(8).
Remove headrest (8) from headrest frame (5).
6.
END OF TASK
Para 4-5
Vol II
4-3/(4-4 blank)