TM 9-1240-216-34
BODY ASSEMBLY INSPECTION UPON RECEIPT (CONT)
3-2.
FRAME 5
Reference
Maintenance Action
Procedure
Step
Tighten. Replace if missing
Using 1/4" screwdriver,
1.
or damaged.
that eight screws (1) (four on
each side) holding headrest
assembly (2) to body assembly (3)
are tight.
Repair or replace if
Turn locking lever (4)
2.
damaged.
counterclockwise and check
for binding.
Replace if damaged or missing.
3.
Check for one washer (5)
between locking lever (4)
segment (6) and two washers (7)
between locking lever (4) and lock
nut (8).
GO TO FRAME 6
Para 3-2 Cont
3-7
Vol II
