(1) Assemble, in sequence, items 18 through
(3) Disassemble items 7, 12, 13, 14, 15 (fig.
16 (fig. 6-12).
b. Inspection.
Inspect the motor for exterior
(2) Connect the wiring to the connector in
accordance with the wiring diagram (fig. 6-3).
damage, burned, broken, or bare wires, and a bent or
(3) Assemble,
in sequence,
items
10
broken shaft. Inspect the radio-suppression filter for
through 7 (fig. 6-7).
similar exterior damage.
c. Installation.
(1) Assemble, in sequence, items 15, 14, 13,
6-19.
Replacement of Gear Case Motor 3010-906-
12 and 7 (fig. 6-12).
6317
(2) Attach and solder the two wires to the
terminals of the radio-suppression filter, item 12 (fig. 6-
a. Removal.
(1) Disassemble items 7 through 10 (fig. 6-7).
(3) Assemble, in sequence, items 10 through
(2) Unsolder and disconnect the two wires
from the noise-suppression filter, item 12 (fig. 6-12).
6-17
