TM 9-1240-415-13&P
0019 00
INSTALLATION
1.
Ensure four shims (1) are in place on mount (2) before assembling to
the telescope. Replace shims if defective. Any defective shim material
remaining on the mount should be carefully scraped off and the surface
cleaned. Remove shim backing paper from new shim(s) and attach the
sticky surface to the mount in the positions shown.
1 /1 6 " T O
1 /8 "
1 /4 " T O
5 /1 6 "
2
1
1
0019 00-3
