TM 9-1240-401-34&P
d. Assembly
1 Cut three pieces of insulation sleeving (9) and slide
over three wires of cable assembly (8).
2 Solder three wires to receptacle connector (10)
using solder and flux. Remove tags.
3 Cut four pieces of insulation sleeving (6) and slide
over four wires of cable assembly (8).
4 Solder four lug terminals (7) to four wires of cable
assembly (8) using solder and flux.
M118A2 ELBOW TELESCOPE WIRING DIAGRAM
e. Installation
1
Position wiring harness (5) in housing (4).
2
Secure wiring harness (5) with two clamps (3), two
flat washers (2), and two machine screws (1).
M118A3 ELBOW TELESCOPE WIRING DIAGRAM
