TM 9-1240-400-34&P
ASSEMBLY AND ALINEMENT OF V-BLOCK ADAPTER ASSEMBLY
1
Secure V-block (1) (figure 11, appx D) to base (2)
(figure 11, appx D) with two 10-24 x screws (3).
2
Secure clamp (4) (figure 11, appx D) to V-block (1)
with 10-24 x 3/8 screw (5).
3
Install 10-24 x 1/2 screw (6) in top of clamp (4).
4
With V-block (1) in upward position, use C-clamp
(7) to secure V-block adapter (8) to plate (9).
5
Install V-block adapter assembly (10) on leveled
surface plate (11) and insert two 1.00-in. (2.54-cm)
dowel pins (12) in the 0.25-in. (0.64-cm) holes.
Place a 6.00-in. (15.24-cm) parallel bar (13) across
two dowel pins (12).
4-21
