TM 9-1240-382-34
SECTION III. MAINTENANCE PROCEDURES
2-3 REMOVAL OF MAJOR COMPONENTS
This task covers:
Removal
INITIAL SETUP
Troubleshooting References
None
Applicable Configurations
Equipment Condition
All
None
Special Environmental
Test Equipment
Conditions
None
None
Special Tools
None
Materials/Parts
General Safety Instructions
None
None
Personnel Required
1
Approximate Time Required
_References
See Maintenance Allocation Chart (MAC)
None
in TM 9-2350-253-20-2.
LOCATION
ITEM
REMARKS
ACTION
REMOVAL
Periscope
Major Components
Elbow (1)
Support the elbow assembly (1) by
Latch (2)
hand and release the latches (2).
Head (3)
Carefully slide the elbow assembly
Body (4)
from its position in the head assembly
Screw (5)
(3). Support the daylight body
Lockwasher (6)
assembly (4) by hand and remove the
two screws (5) and lockwashers (6).
Carefully slide the body assembly out
of the head assembly (3).
2-5
