TM 9-1240-382-34
SECTION III. REPAIR PARTS, SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
1-7.
COMMON TOOLS AND EQUIPMENT. For
1-8. SPECIAL TOOLS, TMDE AND SUPPORT EQUIP-
authorized common tools and equipment refer to. the
MENT Spares and repair parts are listed in TM 9-1240-
Modified Table of organization and Equipment
382-34P. Special Tools required for direct and general
(MTOE) applicable to your unit.are listed below.
support are listed below.
Table 1-1. Special Tools and Equipment
Nomenclature
National/NATO
Use
stock number
PURGING KIT:
Used with nitrogen gas to purge and
fire control
charge the head assembly, body assembly,
or elbow assembly.
NITROGEN
Used to supply dry nitrogen to purge and
TECHNICAL:
charge the head assembly, body assembly,
tank
or elbow assembly.
WRENCH:
5120-00-595-8996
Used to remove and install externally
spanner,
relieved body screw.
pin-face
adjustable
GUN:
4931-00-764-8117
Used to inject sealing compound, and
sealing,
form "spaghetti."
DIOPTO-
4931-00-536-5557
Used to check definition of body or
METER:
elbow.
EXTRACTOR:
1240-01-054-5789
Used to remove intensifier tube from
Tube
elbow assembly.
SPANNER WRENCH:
Used to remove and install the retaining
ring for the eyepiece on the daylight
body assembly.
SPANNER WRENCH:
Used to remove the locking ring from
the cell assembly in the eyepiece on
the daylight body assembly.
1-3/(1-4 Blank)
