TM 9-1240-380-34
Section 13. BORESIGHT KNOB ASSEMBLY
BORESIGHT KNOB ASSEMBLY MAINTENANCE PROCEDURES INDEX
R e f e r e n c e (para)
Task
Removal
Installation
BORESIGHT KNOB ASSEMBLY REMOVAL
APPLICABLE CONFIGURATIONS: M36
TOOLS: 1/4" flat tip screwdriver
Jewelers screwdriver
PERSONNEL: One
EQUIPMENT CONDITION: Infrared body assembly on work bench, power off
FRAME 1
Procedure
Step
NOTE
Maintenance procedures for both boresight knob
assemblies are the same.
1.
Using 1/4" flat tip screwdriver, remove four screws (1), four washers (2), and boresight
knob assembly (3) from infrared body assembly (4).
2.
Using jewelers screwdriver, remove packing (5) from boresight knob assembly (3).
END OF TASK
Vol II
